Page 2 of 20
Introduction
This User Manual contains a detailed description of how to update the firmware of the
Lorgar
Trix-510 Gamepad and the wireless adapter to the latest version.
WARNING! The old firmware version cannot be restored after the update. A factory reset will
also not restore the old firmware version. Use common sense when deciding to update
firmware.
WARNING! A firmware update is not required for the correct operation of the device. It is
recommended to resort to this measure in the most extreme cases, namely:
• the gamepad does not work properly after connecting to a PC, PS3, Nintendo Switch or
smart TV;
• the gamepad does not connect correctly to a computer
via BT;
• the gamepad does not work correctly after pairing;
• buttons or certain combinations do not work correctly.
WARNING! This manual is only applicable to computers running Windows 10/11.
WARNING! Use the official firmware version only which is available at lorgar.com/drivers-
and-manuals. Third-party firmware may adversely affect the operation of the device.
Malfunctions caused by installing third-party firmware on the gamepad or wireless adapter will
void the warranty period.
See “Glossary” section.
Hereinafter refers to a desktop or laptop running Windows 10/11.
To Next Page
Loading...
