30
Conference Calling
Using your phone on an ongoing call
through the phone app, the add call
button can be tapped to connect an
additional caller for a 3-way confer-
ence call.
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
+
With the first call started, tap
the add call button, the ongo-
ing call is put on hold and the
call button turns green. The
add call button is replaced
with a cancel button which
can be tapped to cancel the
conference call and return to
the first caller.
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
To continue the conference
call, select the second caller
from any of the phone app
menu options.
The display returns to the
conference call screen once
the second caller is active and
the conference call is started.
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
Tap to end the conference
call.
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
Tap to view both caller
details. From this screen you
can hang up or mute one of
the callers.
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
Tap to return to the confer-
ence call screen.
Accessing Phone Options
Three options are available to access
a phone paired to the vehicle using
Bluetooth.
– Phone widget - from the drivers
display, see page 16.
– Phone widget – from the centre
display.
– Phone app – from the centre display.
Boost
Torque
Power
%
Nm
bhp
Contact 2 Contact 3
Contact 4 Contact 5 Contact 6
Using Phone Widget
See page 16 to access the phone
widget from the centre display.
Widget Options
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
Tap to view details of the 3
most recent calls.
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
Tap to view details of the
6 most recently added
favourites.
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
Tap on a recent call or favourite
contact to start a call.
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
If required, tap the top area of the
widget to open the phone app from
the home screen of the centre
display.
PHONE
To Next Page
Loading...
