33
Contacts
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
With the phone connected via
Bluetooth, tap the sidebar op-
tion to show the phone’s contact
information in alphabetical order.
A maximum of 3000 contacts can
be synchronized.
Calling Contacts
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
Tap on the contact profile image
to call the first number stored for
that contact.
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
If alternative numbers are avail-
able, tapping to the right of the
image or button will open the
contact information, showing up
to 2 numbers which can be tapped
to select and call.
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
Tap to right of the image or col-
lapse button to close the contact
information.
+ PHONE
A1 Contact A1
A
Home +46707778738
Work +46313097570
contactA1@mail.com
Adding Contacts to Favourites
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
Tap the button to expand the
contact information and press on
the outlined to turn white.
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
To remove from favourites, press
the again to change to the
outlined heart icon.
Searching Contacts
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
In the recent, favourites and
contact menus, tap the button
at the top of the screen to display
the pop-up keyboard. Enter a con-
tact name or email/postal address
and the applicable names of any
stored contacts will appear as you
type, see page 36.
Refreshing Contacts List
96
1.4.6.5 Keyboard Key Pop-ups Continued
Keyboard language key also has secondary functions when the tap and hold gesture has
been actioned. Keyboard languages key can display a maximum of 3 languages as well
as the Language settings button, tapping this button will take the user to the language
settings within the settings application.
Examples of language selection key with two and
one language available.
User can also switch between languages by swiping the
space bar or performing a single tap on language button.
Once language has been changed, language title will be displayed on
the space bar for 2 seconds then disappear.
1.4. MODULES & COMPONENTS
Fig. 1 Fig. 5
Fig. 6
Fig. 3
Fig. 2
Fig. 4
96
1.4.6.5 Keyboard Key Pop-ups Continued
Keyboard language key also has secondary functions when the tap and hold gesture has
been actioned. Keyboard languages key can display a maximum of 3 languages as well
as the Language settings button, tapping this button will take the user to the language
settings within the settings application.
Examples of language selection key with two and
one language available.
User can also switch between languages by swiping the
space bar or performing a single tap on language button.
Once language has been changed, language title will be displayed on
the space bar for 2 seconds then disappear.
1.4. MODULES & COMPONENTS
Fig. 1 Fig. 5
Fig. 6
Fig. 3
Fig. 2
Fig. 4
Swipe down the from the top of
the contacts list page to reveal a
with a message ‘Pull to refresh’.
Hold the screen until ‘Refreshing’
is displayed. A ‘Refreshed’
message is displayed once
completed.
PHONE
To Next Page
Loading...
