Louroe Electronics AP-1TB

To Next Page

LOUROE MODEL AP-1TB AUDIO MONITORING

BASE STATION

The LOUROE AP-1TB is a single zone audio monitoring base station with a built-in

microphone and speaker. When connected with a remote Louroe Speaker/Microphone,

it provides a bi-directional (2-way) communication system. Audio can be monitored by

pushing in the “Press To Activate Zone” switch. The unit contains an “Audio Out” and

“Audio In” jack for connection to a DVR/VCR for recording and playback. A 3.5mm

headphone jack is provided for private listening. The AP-1TB is compatible with Louroe

Speaker/Microphone Models TLI, TLM Series, TLMC, TLO and TLSP.

AP-1 TB Audio Base Station

(can be used as a desktop

or wallmount)

AP 1TB 6/08

WIRING REQUIREMENTS

4 Conductor consisting of:

2 Conductor shielded, 20 gauge

with 22 gauge drain (microphone

connection)

2 Conductor unshielded, 18 gauge

(speaker connection)

All in the same jacket

West Penn 356 or equivalent

OUROE

LECTRONICS

6955 VALJEAN AVE, VAN NUYS, CA 91406

PH: (818)994-6498 / FAX: (818)994-6458

sales@louroe.com / www.louroe.com

AP-1TB

AUDIO MONITORING BASE STATION

INSTALLATION AND OPERATING INSTRUCTIONS

Main Page

Need help?

Do you have a question about the Louroe Electronics AP-1TB and is the answer not in the manual?

Summary

Product Description and Wiring Requirements

AP-1 TB Audio Monitoring Base Station

Introduction to the single zone audio monitoring base station with built-in microphone and speaker.

Wiring Requirements Summary

Details the four-conductor cable requirements for microphone and speaker connections.

Description of Parts

Front and Rear Views

Visual identification of AP-1TB front and rear components with numbered labels.

Detailed Part Descriptions

Explains the function of each numbered part on the AP-1TB unit.

Wiring and Connections

Standard Wiring Connections

Step-by-step guide for connecting the AP-1TB to a remote speaker/microphone.

Audio Input;Output Connections

Describes connections for DVR/VCR recording and playback via RCA jacks.

Advanced Configuration and Operation

Paralleling Two AP-1 TB Base Stations

Procedure for connecting multiple AP-1TB units for expanded coverage.

Terminal Block Identifier

Explains the function of each terminal on the microphone connection block.

Operation and Test Procedures

Step-by-step guide for operating and testing the AP-1TB unit's functions.

Wall Mounting Instructions

Details how to mount the AP-1TB unit to a wall using screws.

Specifications and Notes

AP-1 TB Specifications

Technical specifications including input sensitivity, power output, impedance, and dimensions.

Important Note on Talkback Output

Information regarding the 70V talkback output and 600Ω alternative.

Important Notice

Legal requirement for public notice of audio monitoring on premises.

Warranty Information

Product Warranty Details

Details Louroe Electronics' warranty against defects in material and workmanship.