To Next PageTo Next Page
Need help?Do you have a question about the Love Controls 16A2 Series and is the answer not in the manual?
General| Accuracy | ±0.25% of span |
|---|---|
| Control Mode | PID |
| Input | Thermocouple, RTD |
| Output | Relay, SSR |
| Display | LED |
| Power Supply | 24 VAC/VDC, 120/240 VAC |
| Operating Temperature | 0 to 50°C (32 to 122°F) |
| Enclosure Rating | NEMA 4X |
| Control Type | On/Off, PID, Auto-tuning |
Details for identifying the specific model configuration and features.
Instructions for mounting the instrument in an enclosed panel, including cut-out dimensions.
Guidelines for connecting sensors, power supply, and output signals to the control.
Procedures for setting and managing the four access security levels and passwords.
Table detailing security levels, displaying values, and password entry values for access.
Details programming and operation of the Ramp/Soak feature specific to the 16A3 Series model.
Details the automatic PID tuning process, its theory, setup, and operation for optimal control.
Explains serial communication options (RS-485/RS-232) and non-volatile memory types.
Describes adjustments for Set Point 1 (SP1) and Set Point 2 (SP2) in the primary menu.
Details Alarm 1 Low (A1Lo) and Alarm 1 High (A1Hi) settings in the secondary menu.
Lists selectable input types and their corresponding temperature and count ranges for calibration.
