LOVEWE P005 - Troubleshooting

LOVEWE P005 07
Product Category
The machine is
not working
1. Check whether the battery is in
alow-power state.
2. lf the above situation occurs,
pleasecharge the battery before use.
Inaccurate
airpressure
display
1. Check whether the connection between
the inflation pipe joint and the tire air
nozzle is too tight, if the connection is too
tight, you can gradually loosen the
interface for testing;
2. Check whether the air pressure unit is
correct, disconnect the inflator hose from
the tyre nozzle and reconnect the power
supply after 5 seconds.
After starting the
preset tire
pressure, the
machine stops
after making a
sound, and the
tire pressure
display is
abnormal
An external tire pressure monitoring is
installed on the tire air nozzle. The limit nut
of the tire pressure monitoring prevents the
normal connection between the air pump
nozzle and the wheel air nozzle, causing
the air pump to fail to inflate; If the current
ambient temperature is below zero, please
use a lighter to slightly heat the tire valve
before inflating.
Conversion of
inflation standard
units
100kpa=14.5psi=1kg=1.01 bar
The tire pressure of commonly used cars is
2.3-2.5bar.
Reminder: If you still can't solve the problem, please
contact after-sales support(lovewe.brand@gmail.com).
Cause/Solution
Troubleshooting