How to Use
Led Lighting
LOVEWE P005 04
This product is equipped with LED lighting function, which can
help you to illuminate when working in a dark place. In
power-on mode, long press to turn on the LED light, and long
press the again to turn off the LED light.
For car, motorcycles, electric vehicles, bicycles:
Long press to turn on the machine, after monitoring the air
pressure value to zero, confirm whether the set value is within
the reasonable air pressure range of the tires and other
objects that need to be inflated, connect the air nozzle tube in
the accessories to the air hole of the air pump and tighten it,
and buckle the air nozzle. After the tire air core, press the
lever to confirm whether the air pump mode is correct and then
press the key to start the air pump to start air pumping, and
stop automatically when it reaches the set value.
For balls, swimming rings, air cushions:
Long press to turn on the machine, after monitoring the air
pressure value is set to zero, confirm whether the set value is
within the reasonable air pressure range of the tires and other
objects to be inflated, connect the air nozzle tube in the
accessories to the air outlet of the air pump and tighten it, and
fasten the air nozzle. After the ball needle (or two other
switching nozzles), press the handle, confirm whether the
pump mode is correct, press the button to start pumping,
and stop automatically when it reaches the set value.
The product provides four air pressure units for you to choose:
PSI / BAR/ KPA / Kg/cm2
Default tire pressure in various modes.
Basketball
Bike
Motorcycle
Car
U
U
0.55
BAR
3.45
BAR
2.76
BAR
2.48
BAR
To Next Page
Loading...