What does ERROR 2 mean on my Lowenstein Medical SOMNOcheck micro CARDIO Diagnostic Equipment?
If you're seeing ERROR 2, it indicates an issue with the RAM. Return the device to the manufacturer to have it checked.
How to fix a Lowenstein Medical SOMNOcheck micro CARDIO that does not switch on?
If your device isn't turning on, try these steps: * Replace the batteries or charge the rechargeable batteries, as they may be discharged. * Ensure the batteries or rechargeable batteries are inserted with the correct polarity. If neither of these steps works, the internal fuse may have tripped, and the device should be returned to the manufacturer for repair.
Why are the batteries/rechargeable batteries supplying no power to my Lowenstein Medical Diagnostic Equipment?
If the batteries or rechargeable batteries aren't supplying power, here's what might be happening: * The contact springs may not be making proper contact. Try reinserting the batteries or rechargeable batteries. * The batteries or rechargeable batteries themselves may be defective. Try replacing them. * The batteries or rechargeable batteries may be discharged. Replace the batteries or charge rechargeable batteries.
What to do if my Lowenstein Medical SOMNOcheck micro CARDIO Diagnostic Equipment is displaying implausible values?
If the results are displaying implausible values, it could be due to a couple of reasons: * The plug connections may not be properly connected. Ensure the connections are firm and check the sensors. * The sensor may have gotten dirty or slipped out of position during the measurement. In this case, repeat the recording with clean or new sensors.
How do I troubleshoot connection issues with my Lowenstein Medical Diagnostic Equipment?
If you're having trouble connecting to the device, consider the following: * Check all cable connections to ensure they are secure and not interrupted. * If the device has switched off, turn it back on using the power button. The device may automatically switch off if the connection has been inactive for more than 5 minutes.
What causes a Lowenstein Medical SOMNOcheck micro CARDIO to display no signals and how can I fix it?
If the device is displaying no signals, it's possible that the plug connections are not properly connected. Ensure that all connections are firm.
What does ERROR 102 mean on my Lowenstein Medical SOMNOcheck micro CARDIO?
If you're seeing ERROR 102, it indicates an issue with the EEPROM. Return the device to the manufacturer to have it checked.
What does ERROR 1 mean on my Lowenstein Medical SOMNOcheck micro CARDIO Diagnostic Equipment?
If you're seeing ERROR 1, it indicates a program code issue. Return the device to the manufacturer to have it checked.
What does ERROR 3 mean on my Lowenstein Medical SOMNOcheck micro CARDIO?
If you're seeing ERROR 3, it indicates an issue with the UART. Return the device to the manufacturer to have it checked.
What does ERROR 5 mean on my Lowenstein Medical Diagnostic Equipment?
If you're seeing ERROR 5, it indicates an issue with the SPI. Return the device to the manufacturer to have it checked.
General| Brand | Lowenstein Medical |
|---|---|
| Model | SOMNOcheck micro CARDIO |
| Category | Diagnostic Equipment |
| Language | English |
Details the color-coded symbols indicating risk levels for sleep disturbances based on measurement parameters.
Provides essential safety information, including hazard levels and precautions for device operation.
Detailed instructions for initiating and conducting a sleep recording session with the device.
Methods for accessing and interpreting the recorded sleep data on the device or via PC.
Comprehensive steps to verify the correct functioning of the device, sensors, and display before use.
Identifies common device faults, their potential causes, and recommended solutions.
Lists critical error messages, their corresponding fault codes, and actions to take.
To Next Page
