Need help?Do you have a question about the Lowrance X-25B and is the answer not in the manual?
General| Depth Capability | 800 ft |
|---|---|
| Transducer Type | Skimmer |
| Depth Capability (m) | 244 m |
| Display Size | 5 in |
| Display Type | LCD |
| Display | LCD |
| Beam Angle | 20° |
| Voltage | 12 V |
Comprehensive technical details including physical size, power requirements, transmitter specs, and screen characteristics.
Describes how to mount the unit using the supplied bracket or optional kits.
Instructions for drilling holes and routing power/transducer cables.
Explains how to attach the unit to the gimbal bracket.
Recommends connecting the power cable directly to the boat's battery.
Emphasizes the necessity of a 3-amp fuse for protection.
Explains the unit's protection against reversed power wires.
Describes the ON/CLEAR, OFF, MENU, and Arrow keys.
Explains initial display menus (LAMP, FEET/METER, CONTRAST).
Describes the default display when the unit is first turned on.
How to navigate and use the unit's menu system.
Automatic adjustment of range and sensitivity based on water conditions.
How to switch from automatic to manual mode.
Lists the selectable depth ranges in feet and meters.
How to set specific depth segments for "zooming" into the water column.
How to activate zoom mode and its behavior in automatic mode.
How to change the distance between upper and lower limits for zoom.
How to manually reposition the zoom window.
How to adjust the unit's ability to detect echoes and detail.
How Grayline distinguishes between strong and weak echoes for bottom hardness and fish size.
How the unit identifies and displays fish symbols.
Displays the depth of a target when Fish ID places a fish symbol.
How to adjust the rate at which echoes scroll across the screen.
Details the settings for Chart Mode 1.
Details the settings for Chart Mode 2 (High Speed Scroll).
Describes the digital-only screen display.
How to activate the alarm for fish symbols.
How to set shallow and deep alarms based on bottom depth.
Procedure to set the shallow depth alarm.
Procedure to set the deep depth alarm.
How to turn the display backlight on or off.
How to switch depth and range units between feet and meters.
How to adjust the screen contrast for visibility.
How ASP reduces noise and clutter for clearer signals.
How to use the built-in simulator for testing features.
Explains how fish arches are formed on the display.
Explains the influence of water temperature and thermoclines on fish behavior.
Steps to diagnose why the unit fails to power on.
Procedure to inspect and verify the fuse status.
Troubleshooting steps for unit malfunctions and interference.
Diagnosing issues with signal reception and display accuracy.
Troubleshooting problems related to boat speed and transducer performance.
Reasons for not seeing fish arches and how to improve visibility.
Identifying and eliminating electrical noise affecting sonar performance.
Diagnosing issues caused by water flow and transducer placement.
Details the coverage, exclusions, and limitations of the warranty.
Lists circumstances under which the warranty does not apply.
Details the six steps for sending the unit for repair.
How to order replacement parts and accessories.
Instructions for checking included items and reporting missing parts.
Service and repair contact information for Canadian customers.
Guidelines for shipping units for repair internationally.
Information on the one-year warranty, flat-rate repairs, and repair times.
To Next Page
