45
To switch to a different depth setting, open the Sonar Alarms menu and
repeat the instructions in step 3 above.
To adjust and turn on the deep alarm:
1. Press MENU|MENU|↓ to SONAR ALARMS|ENT.
2. Press ↓ to
DEEP ALARM DEPTH|ENT.
3. Press ↑ or ↓ until the depth is correct, then press
ENT.
4. Press ↑ to
DEEP ALARM ENABLED|ENT|EXIT.
5. To turn off the alarm, press
MENU|MENU|↓ to SONAR ALARMS|ENT|↓
to
DEEP ALARM ENABLED|ENT|EXIT.
To switch to a different depth setting, open the Sonar Alarms menu and
repeat the instructions in step 3 above.
Fish Alarm
Use the fish alarm for a distinctive audible alarm when fish or other
suspended objects are detected by the Fish I.D. feature (Fish I.D.
must be turned on for the Fish Alarm to work). A different tone sounds
for each fish symbol size shown on the display.
Sonar Alarms menu with Fish Alarm selected. The check box
to the left is checked, indicating the alarm is turned on.
To turn the fish alarm on:
1. Press MENU|MENU|↓ to SONAR ALARMS|ENT.
2. Press ↓ to
FISH ALARM|ENT|EXIT.
3. To turn off the alarm, press
MENU|MENU|↓ to SONAR ALARMS|ENT|↓
to
FISH ALARM|ENT|EXIT.
To Next Page
Loading...
Need help?
General
