Need help?Do you have a question about the LRS RX-CS6 and is the answer not in the manual?
The Guest Pagers are used as an on-premise paging system to increase efficiency by alerting waiting customers.
Install charger base plate and charge pagers for 16 hours prior to first use.
Remove pager from stack, record number, hand to guest, and page by entering the number into the transmitter.
Details include voltage, battery type, battery life, charge life, recharge time, operating range, and dimensions.
Use isopropyl alcohol or ethyl alcohol for cleaning. Avoid other cleaners to prevent cracking.
For error codes E007, E008, E009 try OTA programming; for others, contact LRS.
Check pager charge, transmitter power, and preprogrammed configuration.
Verify the wall outlet is working and the transmitter wire is securely plugged in.
Details on stacking limits, jumper wires, LED indicators, and cleaning charging pins.
Refer to troubleshooting, contact support or call LRS for assistance.
Contact LRS before sending a non-warranty item for repair.
Contact LRS for placing orders for more pagers.
Use return address labels on pagers to aid in recovery if lost.
One-year warranty against defects, excluding damage from accident, misuse, or improper connection.
Equipment complies with FCC Part 15 limits for Class B digital devices; instructions for correcting interference.
To Next Page
General