32
4. 온도 센서 2. Key and LED Configuration
I. TRIP RELAY Externals and Configuration
■ N tpye Key / LED ■ A, P, S type Key / LED
■ LED Information
■ Key Configuration
No LED type Operational mode
①
Alarm LED Indicating an overload (Turn on above 90%, Blink above 105%)
②
Batt/SP Self-Protection LED and Battery test LED
③
Ir LED Indicating long-time delay
④
Isd/Ii LED indicating short-time or instantaneous tripping
⑤ Ig/I△n
LED indicating ground-fault
⑥
COMM LED indicating Communication
No Type of button Function
ⓐ
Menu
Measurement display Menu Display,
Menu display Measurement Display
ⓑ
TAP Maintain the active display
ⓒ
Up cursor Move the cursor up on screen or increment a setting value
ⓓ
Down cursor Move the cursor down on screen or decrement a setting value
ⓔ
Enter Enter into secondary menu or setting input
ⓕ
Reset/ESC Reset errors or ESC from menu
① ② ③ ⑤ ④
ⓕ
DIGITAL TRIP RELAY
① ② ③
⑥
⑤ ④
ⓕ
DIGITAL TRIP RELAY
M
ⓐ
ⓑ ⓒ
ⓓ
ⓔ
M
To Next Page
Loading...
