EasyManuals Logo

LS tractor MT235E 2020 User Manual

LS tractor MT235E 2020
218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #169 background imageLoading...
Page #169 background image
5 -21
Check the following check points before using to avoid a failure.
5-6. Check before starting (Daily check)
Wheel bolts and
tightening of
each part
Brake, Clutch
operation
Amount of
engine coolant
Damage of Headlights,
Turn signal lights,
Horn etc.
Fuel
amount
Cleanness of
radiator screen
Amount of
Engine oil
Operation
of Indicators
Tire air pressure
and damage
Condition of air
cleaner primary
element
(1) Engine oil
Oil specification and capacity :
See chapter 5-3, “Lubricants and Capacity” or
the last page in this manual.
Checking engine oil level
- Check the engine oil level before starting
engine or at 5 minutes later after stopping
engine.
- Check if the oil level is between MAX and MIN
marks of the oil gauge. If necessary, add new oil.
- It must only be checked while the engine is
stopped.
- If your engine is operated in dusty/dirty
condition, the service interval must be shorter
than normal condition.
- Must replace the engine oil and engine oil filter
after the first 50 hours of use.
Engine oil gauge
Engine oil gauge
Oil filling inlet

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LS tractor MT235E 2020 and is the answer not in the manual?

LS tractor MT235E 2020 Specifications

General IconGeneral
BrandLS tractor
ModelMT235E 2020
CategoryTractor
LanguageEnglish

Related product manuals