Why does the horn not sound on my LS tractor?
If the horn does not sound on your LS tractor, it could be due to: * Switch failure: replace the switch. * Abnormal wiring: repair the wiring. * Horn failure: replace the horn.
What to do if my LS tractor engine overheats?
If your LS tractor's engine overheats, it could be due to: * Lack of engine coolant: supplement the coolant. * Bad fan belt tension or a broken belt: adjust the belt tension or replace the belt. * Dirt attached to the radiator: clean the radiator.
What to do if the start motor turns but the engine does not start in my LS tractor?
If the start motor turns but the engine of your LS tractor does not start, consider the following: * The battery may be weak: charge or replace it. * There may be a bad ground: tighten the ground. * The engine oil may have improper viscosity: replace the oil with proper viscosity. * There may be air in the fuel system: bleed the air. * The fuel filter may be clogged: wash or replace the filter. * There may be an error in the engine body: repair it. * The fuel cock may be closed: open the cock.
Why is the engine power low on my LS tractor?
If the engine power of your LS tractor is low, it could be due to: * A clogged injection nozzle: repair it. * Carbon piled to valve seat: repair it. * Bad adjustment of valve gap: repair it. * Bad injection timing: repair it. * Lack of fuel supply: check the fuel system. * A clogged air cleaner: clean or replace it.
Why does the relief valve sound off when the lever is placed on the raising position on my LS tractor?
If the lever is placed on the raising position, and relief valve sound off on your LS tractor, it may be caused by: * Upper limit of position control lever is changed: adjust the upper limit.
Why do other illuminating and indicator lights not turn ON on my LS tractor?
If other illuminating and indicator lights do not turn ON on your LS tractor, it could be due to: * Fuse blown: after removing the cause, replace the fuse. * Light bulb cut-off: replace the bulb.
Why doesn't the cylinder work smoothly as steering wheel movement on my LS tractor?
If the cylinder of your LS tractor does not work smoothly as steering wheel movement, it may be caused by: * Air in steering line if not used for a long time: Bleed air. * Air in suction pipe: Repair. * Piston seal damaged: Replace.
Why is it hard to operate the steering wheel on my LS tractor?
If the steering wheel of your LS tractor is hard to operate, it could be due to: * Steering unit spline and column spline is not aligned: check mounted condition of steering unit and column. * Spool and sleeve damaged by foreign material: replace. * Excessive tightening torque of end cap bolt: apply regular torque. * Low speed: adjust RPM or repair. * Wearing or failure: repair or replace. * Valve spool clogged: repair or replace. * Setting pressure too low: reset or adjust.
What causes the clutch to not cut-off in my LS tractor?
If the clutch of your LS tractor does not cut-off, it could be due to: * Lining damaged: repair or replace the lining. * Wrong clutch pedal play: adjust the pedal play.
What to do if the lift arm does not raise on my LS tractor?
If the lift arm of your LS tractor does not raise, consider the following possible causes: * Lack of transmission oil: add oil. * Air in the suction pipe: tighten the filter or replace the seal of connecting parts. * Hydraulic filter clogged: clean the filter or replace it. * Hydraulic pump failure: repair or replace the pump. * Control valve failure: repair or replace the valve. * Cylinder or cylinder-related parts broken: repair or replace them.
General| Brand | LS tractor |
|---|---|
| Model | MT468 |
| Category | Tractor |
| Language | English |
Outlines essential safety guidelines and warnings before operating the tractor.
Describes essential safety devices like the hood, fender, PTO covers, and ROPS.
Identifies and explains the function of various controls on the instrument panel and front of the tractor.
Details the instruments and controls located on the right-hand side and cabin pillar.
Describes the operation and components of the Power Shuttle System.
Details the correct procedures for starting and stopping the tractor engine safely.
Explains how to drive the tractor, change speed, and perform emergency stops.
Discusses operations involving implements like 3-point linkage, PTO, hitches, tires, loaders, and ballasting.
A comprehensive chart detailing maintenance tasks and intervals.
Lists essential daily checks to perform before operating the tractor.
Provides solutions for common air conditioning system failures.
To Next Page