LS tractor MT347 - User Manual

Questions and Answers

B
Brent FergusonAug 10, 2025
What to do if swing, boom, dipperstick and bucket cylinders are not working on my LS tractor accessories?
- B
  brandismithAug 10, 2025
  If the swing, boom, dipperstick, and bucket cylinders aren't functioning correctly on your LS tractor accessories, start by checking and replenishing the hydraulic fluid to ensure it's at the correct level. Inspect hydraulic hose connections to make sure they are properly connected. Also, check the hydraulic hoses for any damage, such as kinks, that could block the flow. Ensure that quick disconnect couplers are fully connected. If these steps don't resolve the issue, inspect for blockages and disassemble the valve if necessary.
N
Nancy RobertsonAug 20, 2025
Why are the hydraulic cylinders on my LS tractor accessories (swing, boom, dipperstick, and bucket) not functioning properly?
- A
  Adam BoyerAug 20, 2025
  Several factors can cause the hydraulic cylinders on your LS tractor accessories (swing, boom, dipperstick, and bucket) to malfunction. These include low hydraulic fluid level, improperly connected hydraulic hoses, blocked hydraulic hoses to/from the control valve, a stuck backhoe control valve or tractor main relief valve, or low system pressure from the hydraulic pump. Other potential causes are a broken control valve linkage, disconnected quick couplers, blockages in the hydraulic hose or tubeline, a defective cylinder piston assembly, or a blocked control valve.
M
Meredith HolmesAug 29, 2025
What causes hydraulic fluid to foam in my LS tractor accessories?
- J
  Jennifer KleinAug 29, 2025
  Hydraulic fluid foaming in your LS tractor accessories is often due to air leaking into the suction side of the hydraulic pump. Check for loose or defective connections between the reservoir and hydraulic pump. It can also be caused by using improper hydraulic oil. Refer to your Tractor Operator's Manual and replace the hydraulic oil with the recommended type.

Summary

1. General Notices for Safety

1-2. Safety Precautions

Outlines essential safety rules, including pre-operation checks, clothing, and rider safety.

2. Instruction for Safe Operation

Safety Devices

Identifies and explains safety devices like Hood, Fender, PTO covers, and ROPS.

Boarding and Exiting the Tractor

Details the correct procedures for safely boarding and exiting the tractor, emphasizing a three-point contact.

3. Instruments and Controls

Instrument Panel and Front Controls

Describes the tractor's instrument panel indicators and front-mounted control switches and levers.

Right-hand Controls and Cabin Pillar (Cabin Type)

Left-hand Controls (Cabin Type)

Left; Right-hand Controls (Roll-bar Type)

Hydraulic System

Provides safety precautions and descriptions for the tractor's hydraulic system components.

4. Operation and Work

Handling a New Tractor

Engine Start and Stop Procedures

Details the step-by-step procedures for starting and stopping the tractor engine safely.

Driving and Stopping the Tractor

Explains how to drive and stop the tractor, including transmission warm-up and speed changes.

Transport on Public Roads

Outlines safety rules and procedures for transporting the tractor on public roads, including lighting.

Field Operations

Covers operations related to field work, including 3-point linkage, PTO, and implement attachment.

5. Lubrication and Maintenance

General Lubrication and Maintenance Information

Maintenance Schedule Chart

Presents a chart detailing periodic maintenance tasks, checking intervals, and actions.

Lubricants and Capacity Specifications

Lists recommended lubricants, capacities, international standards, and engine oil viscosity grades.

First 50 Hour Maintenance Check

Warning Indicator Lights Guide

Daily Pre-Start Checks

Lists crucial daily checks to perform before starting the tractor for safety and damage prevention.

50-Hour Maintenance Intervals

100-Hour Maintenance Intervals

300-Hour Maintenance Intervals

500-Hour Maintenance Intervals

600-Hour Maintenance Intervals

1000-Hour or 1-Year Maintenance

1500-Hour or 2-Year Maintenance

3000-Hour Maintenance Intervals

Troubleshooting Engine and System Issues

Provides a comprehensive guide to diagnosing and resolving common engine and system faults.

LS tractor MT347 Specifications

General

Engine Power	47 hp
Engine Type	Diesel
Brakes	Wet Disc
Hydraulic System Type	Open Center
Rear PTO Speed	540 rpm
Number of Cylinders	4
Steering	Power steering
3-Point Hitch	Category I
Rated Speed	2600 rpm