Differential
lock pedal
HST type
HST typeHST type
HST type
Regarding the function of the differential lock
pedal, HST type is identical with the mechanical one
except that each pedal is located at both different
sides of platform.
(12) HST forward/ reverse pedal
Press the HST forward pedal slowly in order to
move forward and if release the pedal, it returns
back to the “Neutral” position and tractor stops.
The HST reverse pedal is as same as the HST
forward pedal operation.
warning
▶
Press the brake pedal to prevent stopping distance from being extended when
driving in high speed .
▶
DO NOT operate the pedal hastily. It may cause a shock to you.
(13) HST neutral switch (HST type)
It is located under the HST forward/reverse pedal
and the switch shall be pressed if the pedal is
placed on the “Neutral” position as the pedal is
forward
pedal
3
3 3
3 - 13
placed on the “Neutral” position as the pedal is
not pressed.
The engine does not start until the switch is
pressed.
This is switch to prevent the tractor from sudden
starting.
▶
Do not disassemble the HST neutral switch. It may cause a sudden starting and
serious accident.
▶
If the HST neutral switch does not pressed in the neutral position of the HST
forward/ reverse pedal, adjust the switch to be pressed by HST pedal linkage.
warning
To Next Page
Loading...
