1 -10
③ Roll Over Protective Structure
(ROPS) Product Identification
Number (PIN)
The Roll Over Protective Structure (ROPS) PIN
plate (3) is located on the left-hand side rear
steel plate of the cabin. For roll-bar models, it is
located on the right-hand side of the ROPS
connector plate.
The ROPS PIN plate may vary depending on
the market or ROPS type.
3
4
5
④ TM number and Running hours
In case of requesting service or parts from your
dealer, dealer may need TM number(4) and/or
running hours(5) displayed on the instrument
panel.
3
CABIN
Roll-bar
To Next Page
Loading...
