LS iS7 - Page 11

iS7 220V Auxiliary Power Option Card User Manual
11
Basic Function
220V auxiliary power option card supplying
power(5V) to the CPU in controller of IS7 to
continue communication with PLC or host
controller through communication option card
even if input power of IS7 is blocked by external
factors
<Applicable Communication Option>
- RNET
- CANopen
- DEVICENET
- LONWORKS
- PROFIBUS-DP
- ETHERNET
- CC-Link
- RAPIEnet
(2) Use Environment
Ambient Temperature
-10℃ ~ 50℃
Storage Temperature
-20℃ ~ 65℃
Surrounding Humidity
Below 90% RH of relative humidity (with no dew
formation)
Altitude, Vibration
Below 1,000m, Below 5.9m/sec2 (=0.6g)
Environment
There should be no corrosive gas, flammable gas,
oil mist or dust
Protection Degree
According to drive protection rating
Remark
When using Ethernet Option, because of Ethernet communication characteristics,
be sure to reset the host controller for Ethernet communication when the power of
drive is shut off and auxiliary power option is operating for supply.