LS iS7 - Page 16

iS7 220V Auxiliary Power Option Card User Manual
16
(3) Set up Method
<Used>
<Default Value and Not used>
Caution
 Do not use jumper at Ethernet/CC-Link Communication Option.
 Check if the capacity of IS7 is more than 90kW. If so use the jumper at
Profibus/RAPIENET/PROFIBUS-DP/RNET/CANopen/DEVICENET/
Lonworks.
 When using auxiliary power option, the allowable maximum input
voltage of the IS7 product is 480V.(However, the capacity of inverter is
90kW or more product)