Need help?Do you have a question about the LSI AVAGO SAS 9212-4i4e and is the answer not in the manual?
General| Model | SAS 9212-4i4e |
|---|---|
| Interface Type | PCI Express 2.0 |
| SAS Interface | SAS 2.0 |
| Form Factor | Low Profile |
| Manufacturer | LSI (Avago Technologies) |
| Device Type | Host Bus Adapter (HBA) |
| Ports | 4 internal, 4 external |
| Data Transfer Rate | 6 Gbps per port |
| RAID Support | None (HBA - Host Bus Adapter) |
| Operating System Support | Windows, Linux |
Explains the PCIe functionality and its integration with the LSI SAS 2008 controller chip.
Details the SATA and SAS functionality of the LSI SAS 2008 controller chip.
Explains the onboard Flash ROM used for firmware and BIOS storage.
Details the different connectors on the HBA, including PCIe and SATA+SAS.
Describes the physical dimensions and layout of the HBA board.
Details the power requirements and operating voltage of the HBA.
Outlines the operating and storage temperature and humidity ranges.
Describes the safety ratings and compliance of the HBA.
Lists changes made in version 1.1 of the user guide.
Notes that version 1.0 was the initial release of the document.
To Next Page
