LSI GS550 Quick Reference Guide

GS550 UNDERHOOK DISPLAY – QUICK REFERENCE GUIDE
Contact any of our worldwide
locations for more information
techsupport@loadsystems.com
USA | Canada | UK | Dubai | AU
MARKET TESTED & MARKET PROVEN
Wireless & Cable-Based Instrumentation
REV_ENG_20130807
Exit /Alarm Bypass
Use this key to exit up from menus.
This button is also used as a
temporary Alarm override.
Tare / Back
Use Tare to zero any rigging weight.
Also used to navigate through
menu screens.
Next
Used in the menu to select next item.
Info / Down
When the orange light flashes,
press Info to see any critical alert
messages. Also used to move
numeric numbers and choices in
the menu.
Limit / Up
Set the overload alarm by pressing
this key.
Used in the menu to modify numeric
values / choices.
Menu / Enter
Access the system menus and also
used to confirm changes within.
Tare
Tare is used to eliminate rigging and slinging weights, to
do this do the following:
• Press TAR. Key
• Press Menu to select/deselect the Tare function.
• Press Exit to return to normal weighing mode.
Alarm/Overload
To set the Alarm setpoint, do the following:
• Press LIM. Key
• Change Flashing limit reading as required.
• Press Exit to return to normal weighing mode.
Liquid
Crystal
Display
(LCD)
USB Port
Bar Graph
Indicates the load
on the hoist as
a percent of the
working load limit.
Tare Warning Light
The total load is not displayed
when tare light is on.
Keypad
Info Alert Light
Press Info when the info
light flashes to see critical
alert messages.
Parts of line Hoist indicator Tare Indicator Load Working Load Limit
1 1 5 0 0 0 R : 1 0 0 . 5
9 1 0 0 0 0 M A I N B O O M
Radius Chart name
basic Menu Outline:
1) Parts of Line*
3) Display Settings*
3A) Weight units*
3C) Display language*
3D) Light intensity*
3E) LCD contrast*
3F) Backlight mode*
4) Installation*
4A) Sensor List
4B) Sensor Calibration
4F) Data Logger
4G) Lockout Settings
4H) Password Settings
4I) Network Options
5) System Diagnostic*
5A) System Sensors
Diagnostic*
5B) Radio Network
Diagnostic*
5D) Display Diagnostic*
*available without operator password by default

LSI GS550 Specifications

General

Brand	LSI
Model	GS550
Category	Monitor
Language	English