Need help?Do you have a question about the LSI GS550 and is the answer not in the manual?
Description of the GS550 system, its components, and capabilities.
Information on compatibility between different GS series firmware versions.
Steps for powering on the GS550 and establishing sensor communication.
Details the GS550 LCD, sensor status lights, infrared port, and keypad functions.
Explains the primary functions of buttons like Bypass, Tare, Hoist, Info, Limit, and Menu.
Covers menu structure, numbering, navigation, password protection, and layout.
Details sections for Parts of Line, Crane Rigging, Display Settings, and System Diagnostics.
Procedures for verifying and adjusting radius indication and radius parameters.
Information on data logger modes, recording, and sensor list management.
Configuration for network modes, repeaters, wireless updates, and portable download tool usage.
Instructions for installing and using the PC software to view logged data.
Instructions for physically mounting the GS550 display unit and bracket.
Guidance on optimal placement for display antenna, load cells, angle sensors, etc.
Connecting power supply, lockout wires, and understanding wire functions.
Setting up lockout triggers, levels, and warning parameters.
Specific installation steps for Load Cells, Angle Sensors, Anti-Two-Block Switches, Length Sensors, Wind Sensors, Load Pins, List/Trim Sensors, Rope Payout.
Setting up basic and advanced radius parameters.
Procedures for replacing batteries in various sensors.
Includes reading accuracy, load testing, and general care of load cells.
Steps for resolving problems with PDA communication and data transfer.
Covers Model Numbers, FCC, IC, CSA, and CE declarations.
Details on warranty coverage, services, exclusions, and limitations.
Lists contact details for LSI offices and technical support.
To Next Page
General
