GS550 Menu Outline 79
GS550 Menu Outline
1) Parts of Line
2) Crane Rigging
3) Display Settings
3A) Weight units
3B) Display language
3C) Light intensity
3D) LCD contrast
3E) Backlight mode
4) Installation
4A) Sensor List
4A1) Sensor type and radio identification number
4A2) System selected configuration number
4A3) Configuration number selection mode
4B) Sensor Calibration
4B1) Automatic value calibration wizard
4B2) Manual parameter calibration
4B3) Reset sensor parameters
4C) Radius Settings
4C1) Boom length
4C2) Slew offset
4C3) Height offset
4C4) Boom deflection
4C5) Boom top length
4C6) Boom top offset
4C7) No load deflection
4C8) Jib offset
4C9) Lattice extension offset
4C10) Jib mounting point perpendicular
4C11) Jib mounting point parallel
4C12) Select sheave
4C13) Jib length
4C14) Luffing jib length
4C15) Lattice extension length
4C16) Manual length
4C17) Sheave head length perpendicular
4C18) Sheave head length parallel
4C19) Sheave radius
4C20) Deduct
4D) Chart Settings
4D1) Operation mode
4D2) Crane capacity chart interpolation
4D3) Out of charts default working load limit
4D4) Enable start section
4D5) Enable stop section
4D6) Retracted boom length tolerance
4D7) Intermediate boom length tolerance
4D8) Extended boom length tolerance
4D9) Radius tolerance
4D10) Boom angle tolerance
4E) Memory Banks
4E1) Copy configuration to memory bank A
4E2) Copy configuration to memory bank B
4E3) Copy configuration to memory bank C
4E4) Copy memory bank A to current configuration
4E5) Copy memory bank B to current configuration
4E6) Copy memory bank C to current configuration
4E7) Restore factory configuration
4E8) Clear configuration
4F) Data Logger
4F1) Data logger mode
4F2) Adjust date
4F3) Adjust time
4G) Lockout Settings
4G1) Warning level
4G2) Alarm level
4G3) Lockout level
4G4) White wire lockout trigger
4G5) Green wire lockout trigger
4G6) Orange wire lockout trigger
4G7) Blue wire lockout trigger
4G8) Lockout relay inverted
4H) Password Settings
4H1) Set administrator password
4H2) Set user password
4H3) Tare menu password protection
4H4) Limit menu password protection
4H5) Info menu password protection
4H6) System start-up password protection
4H7) Parts of Line menu password protection
4H8) Chart Rigging password protection
4H9) Display Settings password protection
4H10) Sensor List password protection
4H11) Sensor Calibration password protection
4H12) Radius Settings password protection
4H13) Chart Settings password protection
4H14) Memory Banks password protection
4H15) Data logger password protection
4H16) Lockout Settings password protection
4H17) Network Options password protection
SkyAzúl, Equipment Solutions
To Next Page
Loading...
Need help?
General
