LSIS XP30-BTE - Page 90

Appendix 1. Troubleshooting
App.1-15
Object
Error code
Occurrence
location
Error message Reason and measure
Type Address
0x67 XGT Panel
Cannot move new
project data files.
The project data classified according to the
content is moved to the original storage
location. But when it fails, the downloading is
stopped. If this symptom is repeated, contact
Customer Service Center.
0x68 XGT Panel
Cannot move project
backup file.
The downloaded project zip data is moved to
the original storage location. But when it fails,
the downloading is stopped. If this symptom is
repeated, contact Customer Service Center.
XGT Panel
booting
0x28
0x01 XGT Panel
Previous instance is not
terminated.
XGT Panel software was already started.
Reboot the device. If this symptom is
repeated, contact Customer Service Center.
0x02 XGT Panel
Start Server Fail. Restart
XGT Panel
The XGT Panel software can’t initialize the
communication status normally. Check the
communication status again. If this symptom
is repeated when communication is normal,
contact Customer Service Center.
0x03 XGT Panel
Failed to Start Echo
Server.
The XGT Panel software can’t initialize the
communication status normally. Check the
communication status again. If this symptom
is repeated when communication is normal,
contact Customer Service Center.
0x04 XGT Panel
Failed to accept
connection.
The XGT Panel software can’t initialize the
communication with the XP-Builder normally.
Check the communication status again. If this
symptom is repeated when communication is
normal, contact Customer Service Center.
0x05 XGT Panel
Failed to rename
UpdateNew.exe
In the present XGT Panel the new updated
XGT Panel software’s name can not be
changed.
After rebooting the XGT Panel, update again.
When rebooting, if you can’t start engine,
delete
\\FlashDisk\LSISProduct\UpdateNew.exe in
the XGT Panel. Then if you touch Update.exe
and execute the XGT Panel, it can be update
mode. Try update again. If this symptom is
repeated, contact Customer Service Center