LST BC016 Series - User Manual

© by Labor Strauss Sicherungsanlagenbau GmbH Wien
Connection of detectors
Labor Strauss
User Manual


Summary

Conventional Detector Technology

Connection of Manual Call Points

Connection of Automatic Detectors

Guides for connecting automatic detectors like FC600 and FC650.

ADM Technology and Loop Configuration

Loop Element Address Programming

Methods for assigning addresses to loop elements.

Manual Loop Element Addressing

Using programming units for manual address assignment.

Intelligent Automatic Detectors and Modules

Automatic Detectors Series FI700

Automatic Detectors Series FI750

Intrinsically Safe Circuits for Hazardous Areas

Creating intrinsically safe circuits for hazardous environments.

Conventional Zone Module FI700;M1 CZ Connections

Connecting detectors/call points using the conventional zone module.

Wireless Systems and Zone Modules

RF Interface FI7 x0;RF;W2 W

Connecting the RF interface for wireless communication.

RF Expander FI7 x0;RF;WE

Conventional Zone Module FI700;M1 CZ

Connecting conventional detectors via a zone module.

Detector and Module Configuration

Connection of Contact Detectors with Monitor Modules

Connecting contact detectors using monitor modules.

Control Modules Overview

Combi Modules Introduction

Loop Sounders and Strobes

Device Programming and Status Monitoring

Programming Detectors, Modules, and Signalling Devices

Guide to parameterizing devices on BC216/BC600.

Parameterising Detectors on the BC216

Parameterising Wireless Elements on BC216

Loop Line Verification and Maintenance

Check of the Loop Lines

Contamination Detection and Maintenance Prognosis

LST BC016 Series Specifications

General

Brand	LST
Model	BC016 Series
Category	Control Panel
Language	English