INSTALLATION, OPERATION AND MAINTENANCE MANUAL
FW cooling only range – Monosplit single-phase
Caution: the use of a manual that is not up to date with the condensing unit version does not
engage the responsibility of LTB
The service spaces are as follows :
Setting up :
It is possible to install the CU in two ways:
First possibility: hanging the CU against a wall using its back mounting rail (supplied with the CU) :
Second possibility: installation of the CU (on feet, brackets ...) and fixing the CU on the bottom. For
FW size 07 to 24, four hexagonal M8 inserts are provided for this purpose:
FW 07 to 24 top view
For size 36, the holes are not pre-drilled.
All precautions should be taken to avoid the transmission of vibrations. If the vibrations are an important
part of the installation, it is necessary to favor an installation according to the second possibility.
To Next Page
Loading...