To Next Page
J
Justin NormanJul 27, 2025
How to reset login password on LTE LTE-S4?
- YyhernandezJul 27, 2025
To regain access, restore the LTE Network Router to its factory default settings.
How to reset login password on LTE LTE-S4?
To regain access, restore the LTE Network Router to its factory default settings.
What to do if 4G LED indicator is red on LTE-S4 Network Router?
If the 4G LED indicator is always red on your LTE-S4 Network Router, it indicates that the router hasn't detected the 4G module. Try resetting the device. If it consistently fails to detect the module, consider returning it.
Why is the 4G indicator flashing red slowly on my LTE LTE-S4?
If the 4G indicator flashes red slowly, it means the LTE-S4 Network Router hasn't detected the SIM card. Please re-insert the SIM card. Also, ensure you've selected the correct operation mode in the router's software to resolve any networking anomalies.
How to reset AP’s SSID and passwords on LTE LTE-S4 Network Router?
To recover your AP’s SSID and passwords, connect your computer to the LTE-S4 Network Router using a LAN cable and log in. Then, go to the Wireless settings to reset the passwords. Alternatively, you can restore the router to its factory default settings.
What to do if there is no WiFi indicator on LTE-S4 Network Router?
If there is no WiFi indicator on your LTE-S4 Network Router, and you're using DC power, check the local power supply. Note that the WiFi indicator should light up within 30 seconds after powering on the device.
What to do if I can’t access to AP’s IP address on LTE LTE-S4 Network Router?
Check the AP’s DHCP settings and ensure it is enabled.
Details the physical ports on the LTE router, including antenna, SIM, WAN, and LAN connections.
Explains the DC power connection standard and diagrams for powering the LTE-S4 router.
Instructions for connecting the LTE Router to a computer using a LAN cable.
Ensures the PC is set to obtain an IP address automatically for network access.
Steps to log in to the router's web interface by typing the IP address in a browser.
Details on finding and connecting to the router's Wi-Fi network (SSID: 4G-LTE).
Instructions for authenticating to the router's web interface using wireless connection.
Addresses issues if the computer cannot search for available wireless networks.
Guides users through the router's setup wizard for initial configuration.
Choosing the 3G/4G mode for internet connectivity via cellular network.
Configuring the Wide Area Network settings, including connection type and mobile network details.
Setting up the Local Area Network IP address and DHCP server.
Configuring wireless network parameters like SSID, security, and channel.
Finalizing the configuration changes, which may involve a system reboot.
Adjusting advanced wireless parameters for performance optimization.
Configuring IP settings after the router reboots to enable internet access.
Monitoring the router's operational status via the web interface.
Managing system data, exporting configurations, and restoring defaults.
Configuring routing rules, dynamic DNS, and quality of service parameters.
Setting user credentials and viewing system operation logs.
Updating the router's firmware and configuring system time.
Resolving problems with logging into the router via web management or accessing its IP address.
Troubleshooting Wi-Fi indicators, 4G module detection, and SIM card recognition.
General| Model | LTE-S4 |
|---|---|
| Category | Network Router |
| Wi-Fi | 802.11 b/g/n |
| Ethernet Ports | 1 |
| Max Download Speed | 150 Mbps |
| Max Upload Speed | 50 Mbps |
| Network Type | LTE |
| SIM Slot | Single SIM |
| Battery | 2000 mAh |
| LTE Category | Category 4 |