Network Video Recorder User Manual
70
6.3.8 Call Linear Scan
Purpose
Follow the procedure to call the linear scan in the predefined scan range.
Step 1 Click on the quick settings toolbar of the PTZ camera’s Live View.
Step 2 The PTZ control panel displays on the right of the interface.
Step 3 Click Linear Scan to start the linear scan and click it again to stop it.
Step 4 (Optional) Click Restore to clear the defined left limit and right limit data.
Reboot the camera to have the settings take effect.
6.3.9 One-Touch Park
Purpose
Certain speed dome models can be configured to start a predefined park action (scan, preset,
patrol and etc.) automatically after a period of inactivity (park time).
Step 1 Click on the quick settings toolbar of the PTZ camera’s Live View.
The PTZ control panel displays on the right of the interface.
Step 2 Click Park (Quick Patrol), Park (Patrol 1), or Park (Preset 1) to activate the park action.
Park (Quick Patrol): The dome starts patrolling from the predefined preset 1 to preset 32 in order
after the park time. Undefined presets will be skipped.
Park (Patrol 1): The dome starts moving according to the predefined patrol 1 path after the park
time.
Park (Preset 1): The dome moves to the predefined preset 1 location after the park time.
The park time can be set only via the speed dome configuration interface. The default value is 5s
by default.
Step 3 Click Stop Park (Quick Patrol), Stop Park (Patrol 1), or Stop Park (Preset 1) to inactivate it.
6.4 Auxiliary Functions
Before You Start
To Next Page
Loading...