Network Indoor Station Installation Guide
6
● Check the product specification for the installation environment.
Steps
1. Chisel a hole in the wall. The size of the hole should be 76 mm (width) × 76 mm (length) × 50
mm (depth).
2. Insert the junction box to the hole chiseled on the wall.
3. Fix the wall mounting plate to the junction box with 2 screws.
4. Hook the indoor station to the wall mounting plate tightly by inserting the plate hooks into the
slots on the rear panel of the indoor station, during which the lock catch will be locked
automatically.
Figure 3-2 Wall Mounting with Junction Box
To Previous Page
Loading...
