LTS LTH-D301GY-WIFI-2 - Indoor Station Configuration; Programming Indoor Station Relationships; Configuring Main Door Station Link for Indoor Stations; Configuring Indoor Station Room Number

Network Indoor Station Installation Guide
5
Chapter 3 Installation
Indoor station supports wall mounting.
3.1 Wall Mounting Plate
The wall mounting plate and the junction box are required to install the indoor station onto the
wall.
The dimension of junction box should be 75 mm (width) × 75 mm (length) × 50 mm (depth).
The dimension of wall mounting plate is shown.
Figure 3-1 Wall Mounting Plate
3.2 Wall Mounting with Junction Box
Before You Start
Note
● Make sure the device in the package is in good condition and all the assembly parts are
included.
● The power supply the indoor station supports is 12 VDC. Please make sure your power supply
matches your indoor station.
● Make sure all the related equipment is power-off during the installation.