Need help?Do you have a question about the LTS Platinum Series and is the answer not in the manual?
General| Series | Platinum Series |
|---|---|
| Lens | Fixed lens |
| Power Supply | 12V DC |
| Operating Temperature | -22°F to 140°F (-30°C to 60°C) (depending on the specific model) |
| Motion Detection | Yes |
| Remote Viewing | Yes |
| Storage | Supports microSD card (up to 128GB) |
Immediate actions to take in case of smoke, odor, or noise from the device.
Configuration of automatic temperature measurement parameters and rules.
Detailed steps for configuring temperature measurement parameters like emissivity and distance.
Setting up temperature measurement for the entire scene in normal mode.
Configuring advanced temperature measurement rules using Point, Line, or Area detection.
Customizing rule names and types (Point, Line, Area) for temperature measurement.
Manually checking the real temperature of any position on the live view.
Configuring parameters for detecting fire sources and smoking behavior.
Configuring parameters for Video Content Analysis (VCA) such as target display and snapshot settings.
Procedures for calibrating the camera for accurate VCA analysis.
Defining detection rules like Line Crossing, Intrusion, Region Entrance, and Exiting.
Configuring motion detection to identify moving objects and trigger linkage actions.
Configuring alarms for when the video feed is tampered with.
Configuring how the device responds to triggered events or alarms.
Settings for customizing the live view display, such as window division and stream type.
Configuring video parameters like stream type, encoding, and resolution.
Adjusting image features like brightness, contrast, and saturation.
Optimizing thermal channel image display via background and manual correction.
Blocking specific areas in the live view to protect privacy.
Configuring storage paths for memory cards, NAS, FTP, and cloud storage.
Operations for manual and scheduled video recording.
Configuring automatic video recording based on schedules and event triggers.
Configuring IPv4 and IPv6 network parameters for device operation.
Upgrading the device firmware to the latest version.
Improving system security through various parameter settings.
Controlling access by allowing or forbidding specific IP addresses.
Enabling HTTPS for encrypted transmission and secure remote access.
To Next Page
