Outline
This pump is designed to lubricate to each point by delivering relatively small amount of grease
through metering valves.
1. Model:
1.1
Name : Motor Driven Grease Pump
1.2
Model
Twin Type : By switching built-in solenoid, this pump can be used for both PDI (Positive
Displacement Injector) and Series Progressive system.
2. Specifications
2.1
Specifications
(1) Motor & Pump
Specifications
Motor Voltage (V) 24VDC + 10%
Rated Output (W) 20
Rated Current (A) 0.8A
Pump Discharge Volume 10cc/min.
Discharge Pressure 10MPa
Pressure Relief Method
Solenoid Valve
Reservoir
200cc
Cartridge
400cc
Cartridge
700cc Reservoir
Cartridge 260cc
Cartridge Type LUBER MP-0, MP-1, MP-2, FS-2
Grease
Used
Reservoir Type NLGI No. 000, 00 1*
Lithium based grease
* NLGI No1 can be used when the ambient temperature is higher than 20 deg. C.
Model Part No. Power Reservoir System Type
EGM-10S-4-4C
EGM-10S-4-7C
103810
103811
24VDC
24VDC
400CC cartridge
700CC cartridge
Main Tubing Pressure Relief Type
(PDI System)
EGM-10T-4-4C
EGM-10T-4-7C
103834
103835
24VDC
24VDC
400CC cartridge
700CC cartridge
Twin Type
EGM-10S-4-3P
EGM-10S-4-2C
103812
103809
24VDC
24VDC
260cc reservoir
200cc Cartridge
Main Tubing Pressure Relief Type
(PDI System)
To Next Page
Loading...