Why appointment cleaning cannot be activated on lubluelu A901 Vacuum Cleaner?
If your lubluelu Vacuum Cleaner appointment cleaning cannot be activated, it may be because the remaining battery is less than 15%. Ensure the battery is charged above 15% to activate the appointment cleaning feature.
Why is the status indicator of lubluelu A901 Vacuum Cleaner base always red?
If the status indicator of the base of your lubluelu Vacuum Cleaner is always red, indicating abnormal air pressure detection, check for blockages in the vacuum port, passage port, filter assembly, or air outlet of the base. Clean these areas to ensure there are no obstructions.
What to do if my lubluelu A901 has abnormal behaviors?
If your lubluelu Vacuum Cleaner exhibits abnormal behaviors, power it off and then restart it.
What to do if lubluelu Vacuum Cleaner cannot return to charging base?
If your lubluelu Vacuum Cleaner isn't returning to the charging base, it might be too far away. Move the robot closer to the base and try again. The charging may also be disturbed if the base is surrounded by debris.
How to switch on lubluelu A901?
If your lubluelu Vacuum Cleaner cannot be switched on, the battery might be low. Place the robot on the charging base spring contact to automatically power it on. Also, ensure the ambient temperature is between 0°C and 40°C.
Why is my lubluelu A901 failing WIFI connection?
If your lubluelu Vacuum Cleaner fails to connect to WIFI, ensure the robot is within a strong WIFI signal range. If the signal is strong, reset the WIFI connection, download the latest phone client, and try again. Also, verify that you are using the correct WIFI password and that your WIFI band is 2.4G, as this robot only supports that band.
How to fix strange noises when cleaning with lubluelu Vacuum Cleaner?
If your lubluelu Vacuum Cleaner is making strange noises while cleaning, the main brush, side brush, or wheel may be entangled with foreign objects. Power off the device and then carefully clean these components.
What to do if my lubluelu A901 is not charging?
If your lubluelu Vacuum Cleaner is not charging, first, remove the robot from the charging base and check if the status indicator of the base is always on. Poor contact can also be the culprit. Clean the charging electrodes of both the base and the robot to ensure a good connection.
General| Brand | lubluelu |
|---|---|
| Model | A901 |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page
