To Next Page
K
Kayla ValenciaSep 10, 2025
What to do if lubluelu C710 Vacuum Cleaner leans?
- JJoseph GrimesSep 10, 2025
If your lubluelu Vacuum Cleaner is leaning, place it on a level ground to start.
What to do if lubluelu C710 Vacuum Cleaner leans?
If your lubluelu Vacuum Cleaner is leaning, place it on a level ground to start.
What to do if my lubluelu C710 Vacuum Cleaner is not charging?
If your lubluelu Vacuum Cleaner is not charging, first, remove the robot from the charging base and check if the status indicator of the base is always on. Poor contact can also be the culprit. Clean the charging electrodes of both the base and the robot to ensure a good connection.
How to fix strange noises when cleaning with lubluelu Vacuum Cleaner?
If your lubluelu Vacuum Cleaner is making strange noises while cleaning, the main brush, side brush, or wheel may be entangled with foreign objects. Power off the device and then carefully clean these components.
Why is my lubluelu C710 Vacuum Cleaner failing WIFI connection?
If your lubluelu Vacuum Cleaner fails to connect to WIFI, ensure the robot is within a strong WIFI signal range. If the signal is strong, reset the WIFI connection, download the latest phone client, and try again. Also, verify that you are using the correct WIFI password and that your WIFI band is 2.4G, as this robot only supports that band.
How to switch on lubluelu Vacuum Cleaner?
If your lubluelu Vacuum Cleaner cannot be switched on, the battery might be low. Place the robot on the charging base spring contact to automatically power it on. Also, ensure the ambient temperature is between 0°C and 40°C.
What to do if lubluelu C710 cannot return to charging base?
If your lubluelu Vacuum Cleaner isn't returning to the charging base, it might be too far away. Move the robot closer to the base and try again. The charging may also be disturbed if the base is surrounded by debris.
How to fix abnormal TOF sensor on lubluelu Vacuum Cleaner?
To resolve TOF sensor issues with your lubluelu Vacuum Cleaner, clean the along wall TOF sensors.
How to stop power off charging alarm on lubluelu Vacuum Cleaner?
If your lubluelu Vacuum Cleaner gives a power off charging alarm, turn the power on and charge it.
How to fix abnormal anti-drop sensor on lubluelu Vacuum Cleaner?
To resolve anti-drop sensor issues with your lubluelu Vacuum Cleaner, clean the anti-drop sensors and start the robot away from any cliffs.
Why is the base status indicator flashing red on lubluelu Vacuum Cleaner?
If the base status indicator on your lubluelu Vacuum Cleaner is flashing red, put the dustbin bag into the base.
General| Brand | lubluelu |
|---|---|
| Model | C710 |
| Type | Robot Vacuum Cleaner |
| Battery Capacity | 2600mAh |
| Runtime | 120 minutes |
| Dustbin Capacity | 600ml |
| Suction Power | 2200Pa |
| Charging Time | 5-6 hours |
| Navigation | Gyroscope |
| Features | App Control, Voice Control |
