EasyManua.ls Logo

Lucent Technologies 954 - Do Not Disturb; Transfer a Call

Lucent Technologies 954
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
To drop one line:
Press the LINE button of the party you want to keep. The other line will be
dropped.
NOTE: Occasionally, the far-end parties on a conference call might not
hear one another.
Do Not Disturb
Use this feature to prevent interruptions during a call. When you activate
this feature you will not hear paging tones, voice paging, or incoming call
rings. Instead, the LINE light flashes and the INTERCOM light goes on to
signal a call or page. If you receive an intercom call, the INTERCOM light
flashes, and the intercom number calling you appears on the display.
1 Press d to prevent interruptions.
2 Press d again to resume normal call alerts.
Transfer a Call
You can transfer a call you answer to any other 954 phone. Once you
transfer a call, it can be picked up at any other 954 phone, not just at the
intercom number you called. Transfer calls fall into two categories:
announced and unannounced. Announced calls let you alert the other
person verbally that they have a transferred call. Unannounced calls alert
the other person by ringing.
Your phone reminds you every 30 seconds when a transferred call has not
been answered.
Transferring an Announced Call
1 Press p or I.
2 Enter the intercom number where you’re transferring the call.
3 Begin speaking to alert the other person there’s a call.
To answer a transferred announced call, press the LINE button of the call.
Transferring an Unannounced Call
1 Press T.
2 Enter the intercom number where you’re transferring the call.
3 Hang up.
To answer a transferred unannounced call, pick up the handset or press the
LINE button of the call to use the speakerphone.
OPERATION
Lucent 0954 book.L1 5/7/98, 10:35 AM17

Related product manuals