25
970 ISDN Telephone
Terminal Settings
Set the Clock
When your telephone is first installed, or after it has
lost power, the following display is shown:
DATE & TIME NOT SET
To Set the Clock
Press
[MENU]
. The following display appears:
Menu
▼
MEM CALL-LOG OPTIONS
Press the softkey below OPTIONS. The following
display appears.
Options
▼
CLOCK RING SCRN DONE
Press the softkey below CLOCK. The following display
appears, showing the date and time currently set.
Select Month
Jan 1, 1991 10:00 AM
- + NEXT DONE
Clock display format:
MMM DD, YYYY HH:MM AM or PM
MMM = month (Sep, Oct, etc.)
DD = the day of the month (02, 13, etc.)
YYYY = the year (1997, etc.)
HH:MM = hours and minutes, such as 10:45
AM or PM = morning or afternoon
The field being changed is displayed on the first line.
Press the softkey below + or the softkey below - to
scroll through the choices.
Press the softkey below NEXT to go to the next field.
When the last field is changed, press the softkey under
DONE to confirm your choices.
To Next Page
Loading...
