363-205-401 Power Up: DLP-504
Issue 7, March 1997 Page 5 of 6
15. After 15 minutes, the test set
COMPLETE
indicator lights.
16. Is any
REPLACE
indicator on test set lighted?
If
YES,
then continue with Step
17.
If
NO,
then
STOP. YOU HAVE COMPLETED THIS PROCEDURE.
17. Unplug and set aside all defective batteries.
18. Install and connect replacement batteries to battery shelf. Reconnect any
remaining good batteries to battery shelf.
19. Place batteries on high charge by depressing
HIGH RATE CHG/ACTIVATE
pushbutton on
BATTERY CHARGER
and repeat from Step
6.
To Next Page
Loading...
