Conversions: DLP-500 363-205-401
Page 4 of 4 Issue 7, March 1997
Circuit Pack FPA M1 M1 M2 SS/M1 SS/M2 FPC-AutoCut FPC FPD FP303
TCU
1 TCU is required for each equipped dual digroup shelf in B or D LIU slot.
AUA71
R
Note: Fiber-To-The-Home is supported by any FPB, FPC, and FPC-AutoCut system configurations with J1C182AE RT channel
bank assembly. FPF
SLC
-2000 MSDT feature offers FPC-AutoCut service capabilities. (Only operates in FPC mode, not FPB
Mode 1.)
X = Compatible, R = Required, C = RT CIU Access,
F = Required for FPF
SLC
-2000 MSDT applications
* Rated Discontinued Availability,
† The MC97776A1 and the MC97771A1 BCU are functionally equivalent.
‡ The AUB25 CTU must be used when the XTC is used at the central office.
§ The AUB25 can be used in FPB only if the MC97771A1 or MC97776A1 BCU is used.
¶ Requires the MC97755A1 2 BCU and AUB6( ) ADU at the COT for FPF compatibility.
Table B
SLC
Series 5 Carrier System RT Common Unit Compatibility
System Configuration (Note)
FPB Universal or Integrated
No Special
Service
With Special
Service
To Next Page
Loading...