Lucent Technologies SLC 5 Series - Page 459

Conversions: DLP-507 363-205-401
Page 6 of 12 Issue 7, March 1997
7.
!
CAUTION:
Line coding on the digital facility and terminal equipment interfaces
MUST BE THE SAME or service interruptions will result. Lucent
recommends ZCS (also called AMI) option Z be used unless B8ZS option
B is specified in the work order.
NOTE:
Framing format switches are not present on
AUA61C
or
AUA61D
,
AUA62C
or
AUA62D
, and
AUA64C
or
AUA64D LIU
s.
Using orange stick (KS-6320, L1) or equivalent, set line coding and framing
format switches on
LIU
per work order (Table C).
8. Is
LIU AUA61B
,
AUA61C
or
AUA61D
,
AUA62B
,
AUA62C
or
AUA62D
,
AUA64B
, or
AUA64C
or
AUA64D
being installed in the channel bank?
If
YES,
then continue with Step
9.
If
NO,
then proceed to Step
12.
9. Is
LIU
being installed in the channel bank assembly equipped for FPD capabil-
ity?
If
YES,
then proceed to Step
11.
If
NO,
then continue with Step
10.
Table C
LIU Line Coding and Framing
Format Switch Settings
Option
Description
LIU Switch
(S1/S100)
Settings
B8ZS Coding
ZCS Coding
B
Z†
ESF (Fe) Framing Format*
Fs Framing Format*
F
D‡
* Not present on AUA61C/D, AUA62C/D, or AUA64C/D LIUs.
† Use Z for FPB and FPC-AutoCut applications.
‡ Feature Package B (FPB) use only.