Power Up: DLP-500 363-205-401
Page 2 of 2 Issue 7, March 1997
Figure 2 – Typical Circuit Breaker Code Table
3.
!
CAUTION:
Improper AC power connections to a power panel can cause damage to
power shelf equipment.
Verify the CB( ) circuit breakers can be turned on and AC power is present at
the associated J( ) outlet(s).
4. Verify that power shelf(ves), battery heaters, ... listed in the Table on the door
are plugged into the proper outlet and not plugged into the GFCI outlet(s).
STOP. YOU HAVE COMPLETED THIS PROCEDURE.
CIRCUIT BREAKER CODE
CB1 UTILITY AC SUPPLY 60 AMP, 2 POLE
CB2 GENERATOR AC SUPPLY 40 AMP, 2 POLE
CB3 J7, J8 - MISCELLANEOUS 20AMP
CB4 J9 - POWER SHELF 20 AMP, 2 POLE
CB5 J3, J4 - MISCELLANEOUS 20AMP
CB6 J5, J6 - BATTERY HEATERS 20AMP
CB7 J1, J2 - GFCI PROTECTED
CONVENIENCE OUTLETS
20AMP GFCI
CB11 TRANSFER SWITCH
CURRENT LIMIT
60 AMP, 2 POLE
To Next Page
Loading...
