10
Send All Calls
To send all calls (except priority calls) to coverage:
1. Press the Menu button and then the softkey below SAC (if available on your display) while on-hook.
or, Press <Send Calls> while on-hook.
or, Dial the Send All Calls code *3 while on-hook.
[confirmation tone]
Note: You may hear a ring-ping tone from your telephone as each call is forwarded.
To cancel Send All Calls:
1. Press the Menu button and then the softkey below SAC again (if available on your display) while
on-hook.
or, Press <Send Calls> again while on-hook.
or, Dial the Send All Calls Cancel code #3 while off-hook.
[confirmation tone]
Speakerphone
To place or answer a call using the speakerphone:
1. Press <Spkr>.
The red light next to <Spkr> goes on.
2. Place or answer a call, or access the selected feature.
3. Adjust the speakerphone volume if necessary.
To raise the volume, press the right half of the Volume control button labeled ^. To lower the volume,
press the left half of the Volume control button labeled v.
To change from the speakerphone to the handset:
1. Pick up the handset and talk.
The red light next to <Spkr> goes off.
To change from the handset to the speakerphone:
1. Press <Spkr>.
The red light next to <Spkr> goes on.
To Next Page
Loading...