Lucent 6416D+M - Priority Calling; Select Ring

9
Priority Calling
To place a priority call:
1. Press <Menu> and then the softkey below PCall (if available on your display).
or, Press <Priority> (if administered).
or, Dial the Priority Calling code *1.
[dial tone]
2. Dial the extension.
[confirmation tone]
Wait for the called party to answer.
Note: If your call is not answered and you wish to redirect it to coverage, press <Go to Cvr> while
the call is ringing.
To change a regular call into a priority call:
1. Press the Menu button and then the softkey below PCall (if available on your display).
or, Press <Priority>.
2. Wait for the called party to answer.
Note: If you still receive a call waiting ringback tone, wait a few minutes and try again.
Select Ring
To select a personalized ringing pattern:
1. Press <Conf> while on-hook.
The current ringing pattern plays and repeats every three seconds.
2. Continue to press (and then release) <Conf> to cycle through all eight ringing patterns.
3. If you want to save the ringing pattern currently being played, do not press <Conf> anymore. You
hear the selected ringing pattern two more times, then it is automatically saved.
[confirmation tone]
Your new ringing pattern is set.
Note: If you go off-hook, receive a call, or lose power during selection, the process is interrupted
and you must start again.