Need help?Do you have a question about the Lufkin LR600 and is the answer not in the manual?
Caution: Do not look directly into the beam. Keep lasers out of reach of children and never aim at people.
Regularly check calibration before use, after transport, and storage. Absolute calibration requires a specialist workshop.
Details the buttons and indicators on the main unit's control panel for operation and settings.
The aperture from which the laser beam is emitted.
Overview of the laser detector, including its LCD screen, detector window, and levelling vials.
Description of the detector's back light, sensitivity adjustment, volume control, and on/off buttons.
Details the buttons for scan modes, tilt adjustments, re-leveling, rotation speed, and calibration.
Instructions for fully charging the batteries, inserting them, and using the correct charger.
Explains the automatic levelling feature within a ±5° range using electronic sensors.
Details on activating Safety Mode to prevent errors from movement, with LED indicators.
Procedure for positioning the device on a level surface or tripod for automatic levelling.
How to change the rotation speed from high to low after levelling.
Instructions for activating scan mode, adjusting scan angle, and moving the scan area.
How to switch off the SLS and adjust inclination of X and Y axes using the slope button.
Steps to check the calibration of the X, Y, and Z axes using a wall or plumb line.
Detailed steps for adjusting the X and Y axes using the remote control's calibration panel.
Procedure to adjust the Z axis (vertical line) alignment using the remote control.
Caution: Do not look directly into the beam. Keep lasers out of reach of children and never aim at people.
Regularly check calibration before use, after transport, and storage. Absolute calibration requires a specialist workshop.
Details the buttons and indicators on the main unit's control panel for operation and settings.
The aperture from which the laser beam is emitted.
Overview of the laser detector, including its LCD screen, detector window, and levelling vials.
Description of the detector's back light, sensitivity adjustment, volume control, and on/off buttons.
Details the buttons for scan modes, tilt adjustments, re-leveling, rotation speed, and calibration.
Instructions for fully charging the batteries, inserting them, and using the correct charger.
Explains the automatic levelling feature within a ±5° range using electronic sensors.
Details on activating Safety Mode to prevent errors from movement, with LED indicators.
Procedure for positioning the device on a level surface or tripod for automatic levelling.
How to change the rotation speed from high to low after levelling.
Instructions for activating scan mode, adjusting scan angle, and moving the scan area.
How to switch off the SLS and adjust inclination of X and Y axes using the slope button.
Steps to check the calibration of the X, Y, and Z axes using a wall or plumb line.
Detailed steps for adjusting the X and Y axes using the remote control's calibration panel.
Procedure to adjust the Z axis (vertical line) alignment using the remote control.
General| Range | 65 ft (20 m) |
|---|---|
| Accuracy | ±1/8" @ 30 ft (±3 mm @ 10 m) |
| Laser Color | Red |
| Power Source | 3 x AA Batteries |
| Weight | 0.9 lb (0.4 kg) |
| Laser Class | Class II |
| Laser Wavelength | 635 nm |
| Self-Leveling | Yes |
| Battery Type | AA |
| Mounting Options | Magnetic bracket |
To Next Page