Need help?Do you have a question about the Luiton LT-298 and is the answer not in the manual?
Connects the supplied electric condenser microphone to the unit.
UP and DOWN keys for increasing or decreasing the channel number.
Silences the receiver by cutting background noise.
Adjusts receiver gain, functions only in AM mode.
Knob controls radio ON/OFF and adjusts volume.
AM/FM mode selector and CH9/CH19 function.
TX/ASQ LED and RX Signal Meter for status and signal strength.
Digital LED display shows the current channel.
6-pole microphone plug and external speaker jack.
Connect DC power cable to the vehicle electric system with correct polarity.
Use a specific mobile antenna adjusted for 27 MHz frequency range.
Verify correct connections and basic transmit/receive functions.
Details channels, frequency range, operating temperature, and voltage.
Covers system, IF, sensitivity, audio output, and distortion.
Includes system, maximum RF power, modulation, and impedance.
To Next Page
General