4
Installation Precautions
This page states the safety measures the users must take to avoid circumstances where the
system may cause physical damages or injuries. Please THOROUGHLY go over this page before
the system installation/operation.
General Precautions
•
Maintain dust FREE condition during and after System Installation/Operation.
•
Place the system cover in a safe location when opened.
•
Securely stow tools and cables away from the passages.
•
Avoid wearing loosened clothes or accessories during installation/Operation.
•
Avoid any unnecessary actions that may damage/harm system or personnel.
•
Do NOT open the system unless advised by Lumantek representative. Lumantek takes no
responsibility on units with broken RMA seals.
Power Precautions
•
Please check cable overload before connecting the system to the power supply.
•
Avoid wearing metal accessories (Rings, Earrings) connecting system to the power source.
•
Avoid operating on wet floors. Make sure power extension cables, floors, and instruments
are grounded and in a safe operating condition.
•
Discharge static electricity by touching grounding metals before starting hardware
installation.
•
The grounding parts must be disassembled last.
•
Manufacture takes no responsibilities on Direct/Indirect losses or damages due to use of
inappropriate parts or services by unauthorized service provider
•
Supplying power during the system installation may cause damages to the system and
personnel.
To Next Page
Loading...
General