Lumberjack Log Lock - Incorrect Log Lock Usage; Correct Top Plate Orientation

How to NOT use the Log Lock
● Never under any
circumstances have the top
plate positioned with the
handle end lower than the
ladder end
● The handle end of the clamp
plate should always be higher
than the ladder end of the
clamp plate
Proper Orientation
● It is VERY IMPORTANT
to always have the top
plate securely locked
into the ladder “rungs”
on both sides (front and
back)
● Never operate clamp
when top plate is not
located completely in
ladder “rungs”
Correct
Incorrect
8
Fully locked in
ladder “rung”
On edge of
ladder “rung”