2
2
.
The controller has two separable terminal strips with screw termi-
nals. One strip enables to connect the supply and outputs by a wire
of 2.5 mm
2
cross-section. The second strip enables to connect input
signals by a wire of 1.5 mm
2
cross-section.
Fig. 3. View of controller connecting strips
Fig. 4. Supply
supply
interface RS-485
input 3/binary input/
transducer supply 24V
output 1
output 2
input signals
supply
interface RS485
input 3/ binary input / transducer
supply 24 V
input signals
output 1
output 2
supply
To Next Page
Loading...
