US0208-INS-LAB-RevD11 • Patriot Homecare Bed 11
d fe
5. From the inside, reattach the hairpin clip to the cord’s looped end as shown in d. This prevents
the cord from slipping back through the frame bracket hole.
6. From the outside, insert lanyard clevis pin with washer into the small hole directly below the
bed end bracket top hook so that the washer rests against the bracket, as shown in e.
7. From the inside, insert the hairpin clip, now attached to the cord, into the clevis pin hole to
secure, as shown in f.
8. Follow previous steps 1-7 for other bed end corners, ensuring that all four corners are securely
fastened and locked in place.
To Next Page
Loading...
