Lumex PATRIOT US0458 - Caster Position for Height Adjustment

US0208-INS-LAB-RevD11 • Patriot Homecare Bed 8
FULL-ELECTRIC BED ONLY (US0458 / US0458PL): CASTER POSITION
Any full-electric Patriot bed can be used as either a standard-height or low-height bed by moving
the casters.
fig 2: casters mounted at low
height, bed in lowest position
fig 3: casters mounted at low
height, bed in elevated position
fig 1: casters mounted at
standard height
Standard (conventional) bed height
To achieve standard bed height, insert casters into outside legs, as shown in g. 1 above.
Low bed height
To achieve low bed height, insert casters into inner short legs, as shown in gs. 2 and 3 above.
When in the lowest position, the casters are engaged for bed movement, as shown in g. 2 above.
When elevated, the bed is off the casters and cannot be moved, as shown in g. 3 above.
Due to the clearances involved, only minor travel and movement are recommended in the low po-
sition. The casters can be moved to the outer legs to provide clearance if the bed must be moved
or rolled.