Client: ALDI Australia
Project: JU4021
Language: EN
Barcode: 930 5026 10 000 3 00164
8
Date: 23.10.2007
Version: 04
Page: 8 (of 12 pages)
OPERATION GUIDE
10. Put the pieces in the feeding tube and gently press
them towards the rotating filter with the pusher.
NOTE: Do not exert too much pressure on the pusher,
as this could affect the quality of the juice and damage
the filter.
After you have processed all ingredients and the juice flow
has stopped, switch the appliance off and wait until the
filter has stopped rotating.
Tips
Use fresh fruit and vegetables, as they contain more juice. Pineapples, beetroots, celery stalks,
apples, cucumbers, carrots, spinach, melons, tomatoes, pomegranates, oranges and grapes are
particularly suitable for processing in the juicer.
You do not have to remove thin peels or skins. Only thick peels, e.g. those of oranges, pineapples
and uncooked beetroots need to be removed. Also remove the white pith of citrus fruits because it
has a bitter taste.
When preparing apple juice, remember that the thickness of the apple juice depends on the kind
of apple you are using. The juicier the apple the thinner the juice. Choose a kind of apple that
produces the type of juice you prefer.
Apple juice turns brown very quickly. You can slow down this process by adding a few drops of
lemon juice.
Fruits that contain starch, such as bananas, papayas, avocados, figs, and mangos are not suitable
for processing in the juicer. Use a food processor, blender or bar blender to process these fruits
before adding them into the juicer.
Leaves and leaf stalks, e.g. lettuce, can also be processed in the juicer.
Drink the juice soon after you have extracted it. If it is exposed to air for some time, the juice will
lose its taste and nutritional value. Place in sealed container, to extend taste and nutritional value.
To extract the maximum amount of juice, always press the pusher down slowly.
The juicer is not suitable for processing very hard and/or fibrous/starchy fruits or vegetables such
as sugar cane.
Troubleshooting
Problem Solution
The juicer does not work. The juicer is equipped with a safety system. It
will not work if the parts have not been mounted
properly. Check whether the parts have been
assembled in the right way, but switch off the
juicer before you do so.
The motor unit gives off an unpleasant smell the
first few times the appliance is used.
This is not unusual. If the appliance continues
to give off this smell after a few uses, check the
quantities you are processing and the processing
time.
The filter is blocked. Switch the appliance off, clean the feeding tube
and the filter, and process a smaller quantity.
The filter touches the feeding tube or vibrates
strongly during processing.
Switch the juicer off and unplug it. Check if
the filter has been properly placed in the juice
collector. The ribs in the bottom of the filter
should fit properly onto the driving shaft. Check
if the filter is damaged.
•
•
•
•
•
•
•
•
•
10
To Next Page
Loading...
